-Real time tracking by SMS, APP, Web;
-Plug & Play design OBDII tracker;
-USB parameter configuration;
-Accurate odometer & speed reading directly via CAN-BUS;
-Read the error code & clear it via GPRS;
-Adjust harsh brake & acceleration threshold;
-Over-speed/movement/engine on/power failure/vibration alarm;
-Voice monitoring, data logger 5520 offline waypoints;
-AGPS function with fast GPS positioning.
OBDII GPS tracker car alarm TK218 support J1939 protocol
Enquiry about OBDII GPS tracker car alarm TK218 support J1939 protocol
Enter the security code shown above
Description
OBDII TK218 Functions:
1. Plug & play design with OBD-II connector, compatible with all the vehicles with OBD-II connector, supports most of vehicles with the CAN-BUS;
2. Track on command or by time interval via SMS/GPRS;
3. Arm/disarm by SMS or phone call.
4. Check the car’s real physical address (such as city name, street name.);
5. Track by mobile SMS to get the latitude, longitude, speed, direction & odometer etc.
6. Check the location directly by the Google map’s URL;
7. Data logger to store 5520 waypoints.
8. Smart engine ON/OFF detection;
9. Odometer function
10. Over-speed alarm;
11. Movement alarm which can be used as an alarm;
12. Engine on alarm;
13. Vibration alarm;
14. Power failure alarm, with internal rechargeable backup battery;
15. Routine optimization when vehicle turns a corner;
16. Monitor the voice;
17. Voltage range: 10V-60VDC, suitable for motorcycle, car or big truck.
18. Reliable design of framework with hardware watchdog.
19. Extreme power save working mode, low power consumption.
20. Detection on internal battery’s volume & vehicle battery’s voltage.
21. Remote diagnostics function. Readings (1) Vehicle’s real-time data: battery’s voltage, RPM, speed, TAP throttle opening, engine load, coolant temperature, fuel consumption, odometer, error code & times, acceleration times & deceleration times; (2) Driver behavior data: ignition time, total driving time, total idling time, average engine hot-start time, average speed, history high speed, history RPM, total acceleration times & total deceleration times. (3) read VIN & DTC, clear DTC.
Showing video:
Alarm types
Vibration Alarm
In arming status, if the vehicle is vibrated, it will send out the alarm.
Power Failure Alarm
At any time, ff the car battery is cut off, it will send out the alarm.
Engine ON Alarm
In arming status, if the vehicle engine is ON, it will send out alarm SMS and call the preset phone.
Movement Alarm
In arming status, the movement alert is enabled automatically. Once the car moves away from the parking point for the preset distance, it will send out the alarm..
Over-speed Alarm
At any time, if the vehicle runs over the speed limitation, it will send out the alarm. 
