Guangzhou Topten Electronics Factory
-Movement/over-speed/vibration alarm;
-Geo-fence/engine on/power failure alarm;
Enter the security code shown above
TK228 main functions
1.Vehicle OBD II tracker (9-36VDC)
2.Location based service(LBS) + GPS double real time tracking solution Monitor
3.Geofence,movement,overspeed alarms.low battery,shock alarm, ext.power off alarm.
4.Reading OBDII data from car’s ECU
(1) Battery’s voltage, RPM, speed, TAP throttle opening, engine load, coolant temperature, fuel consumption, odometer, error code & times, acceleration times & deceleration times;
(2) Driver behavior data: ignition time, total driving time, total idling time, average engine hot-start time, average speed, history high speed, history RPM, total acceleration times & total deceleration times.
5.Power-saving & GPRS traffic saving mode :
6.Built-in memory
7.Built-in 200 mA battery
8.Built-in microphone for voice listening
9.2.4Ghz active RFID for drivers/passengers
10.Wireless immobilizer to lock engine secretely and safely in case of theft
11.Bluetooth enabled to transmit OBDII data
12.SMS tracking on cell phone with google map link
13.Absolute street address by SMS
14.Web server, free PC tracking software service, Mobile phone APP.
Vibration Alarm
In arming status, if the car is vibrated, the system will send out alert SMS.
Power Failure Alarm
In arming status, if the device is taken off from the OBD-II connector, it will trigger this alarm.
Engine ON Alarm
In arming status, if the car engine is turned ON, it will trigger this alarm. You will get alert SMS firstly & then two calls from the system.
Movement Alarm
In arming status, the movement alert is enabled automatically. Once the car moves away from the parking point for 90 meters, it will trigger this alarm.
Geo-Fence Alarm
Once the Geo-fence is activated, if the vehicle oversteps the boundary, it will trigger this alarm.
Over-speed Alarm
If the vehicle runs over the speed limitation, it will trigger this alarm.
